Do You Know How To Explain Double Glazed Window Repair To Your Boss

Double Glazed Window Repair

Double glazing is an energy efficient investment that reduces loss of heat in winter and helps to keep your home cool in the summer. Repairing your double-glazed windows whenever necessary is a great way to ensure they remain in good working order.

Over time, condensation and misting can affect your double-glazed windows. Double glazed windows may be difficult to open and close.

Broken Panes

A stray baseball, a flying pebble from your lawnmowers, or even a heavy storm can break the double panes of your windows, leaving your home exposed to the elements. While a damaged glass window is difficult to repair but it doesn't have to be replaced. In fact the insulated glass that is between the two panes is in good shape and you can repair your double-pane windows with some DIY effort.

To begin, you'll need take the broken glass out of the frame. You'll need to be careful to avoid any glass shards falling onto the floor or sliding off the frame. Use a pair of gloves to protect your hands and a rag to protect the area surrounding the broken glass to prevent further cuts or breakage. After you have removed the broken glass clean the frame of the window thoroughly to get rid of any sealant or debris. Sand rough areas of the frame to create a smooth and even surface to install your new window.

After cleaning the frame and dried, you can apply a fresh layer of glass to the seam in which the broken pane was removed. This is the best method to ensure your window stays secure and sealed and aid in reducing energy costs by preventing drafts and water from entering the house. Next, you will need to choose the right glazing material. There are a variety of options, including clear tape which is more durable than regular tape and can keep your window secure from further cracking, as well as glazing film that is similar to clear plastic wrap. The advantage of this choice is that it can be painted over to match the frame you have and will also keep snow and rain out too.

No matter what material you use it is important to press the glazier's points into the gap where the putty meets your frame. They will help hold the glass in place, and help it adhere to the frame. The glazier's point can be found in hardware stores, and they come in pre-made ropes that you roll out onto the frame rabbets.

Condensation

Double glazing can be susceptible to condensation issues. If you experience this problem it is best to call the company that supplied the window. Many companies offer warranties and guarantees to will cover the problems. Condensation and fogging in the panes of glass is a clear sign that the seals between your windows are broken and can only be fixed by a professional who will door repair both panes.

This process is a little difficult and requires the use of specific tools to remove the old one and replace the new one, but it can be accomplished by a professional who will provide the required equipment. It is best to delegate the task to a professional. These tools can be hazardous.

Wear safety glasses and gloves if you opt to do it yourself. You may be exposed to glass fragments flying around. It is also important to remove all the putty and metal glazing points from the grooves that the new window will be. It is also recommended to wire-brush the frame and vacuum or wipe with a damp cloth. After the frame is dry and clean you'll need to order a piece of replacement glass which is 1/8 inch less in each direction than your window, and then test it in the grooves.

You will need to apply a layer silicone caulk in the grooves of your frames to ensure your new glass is secure in its installation. After the silicone caulk has dried you can smooth it out and make any necessary adjustments. The wood molding can then be reinstalled.

If the weather abruptly changes, double-glazed windows may become difficult to open and close. Extreme temperatures may cause the frames of double-glazed windows to expand or contract, which causes them to sag and stick. If this is the case you could try wiping the frames using water and lubricating joints. However, it might be best to contact the company that installed your windows for help.

Misted

If moisture is trapped between the glass panes, it can cause misty double glazing. Double glazing is comprised of two glass panes that are separated by an insulating space, typically filled with argon gas for increased thermal efficiency. This results in an airtight seal that keeps warm indoor air inside and cold outside air out.

The seal could fail over time, and moisture may build up between the panes of glass which can cause them to turn to appear misty. This happens because the space between the panes is heated by the sun, causing water vapour to form in it.

This is a natural process however if it occurs between the panes of the window it could be a problem since it will no longer be able to regulate the temperature in the room. Instead the temperature outside the window will affect the temperature inside. Northfield Glass can help you if your double-glazed windows start to mist.

We can replace the individual sealed blown unit without having to replace the whole window, which is a lot less disruptive than a full replacement. Our misty glass repair involves taking off and cleaning the glass before replacing it with a new one. This will result in a watertight seal again.

Certain companies in the business claim to inject chemicals through holes into misted windows to remove the condensation and fog. We don't recommend this method. This is not just unattractive, but it could also damage the toughened glass and can result in windows that do not completely function.

If you don't address the issue quickly it could cause mould, which can not only damage the window, but could also cause health risks for your family members. The condensation in the window could also lead to other problems with your property like damp or rot. In some instances the window might need to be completely replaced.

Blown or failed

Modern double glazed windows have two glass panes, with an inert gas or air in between them. This helps to improve their thermal efficiency, keeping the cold out and heat in. As time passes the gas will become depressurised and cause a variety of issues.

One of the most frequently encountered is condensation between the panes. Although it's a normal occurrence and doesn't mean that your window is failing but it could be an indication that you have to re-seal your windows. Condensation can also be a sign that your double glazing has broken and, in that case, it should be replaced completely.

Also, look out for drafts coming through your double-glazed windows. This could be due to a failure of the seal or a broken handle or lock. It is important to fix this problem as soon as you can. A draft can cause you to spend more on heating. You can test the seals by placing your finger around the edges of the window frame to see whether you feel cold air.

Another indication that your window seals have failed is when you begin to see water dripping on the inside of your windows. This is an indication that you need to seal your double-glazed windows.

Your window frames are made to move a bit as they have to do in order to keep the glass sheets in the right place. However, with time, this particular packaging material will become compacted and this will break the all-important seal. This will allow air to flow between the panes, Window Repair and decrease the energy efficiency of your window.

Double glazing that has ruptured a seal is an indication of failure and should be repaired immediately. A blown seal will stop your double glazing from performing its primary function which is to keep the cold out and warm air in. In addition, a blown seal will let your home's moisture in, which could cause mold and other uncomfortable conditions. It is important to contact a double glazing repair specialist as soon as you spot a damaged seal in your double glazed windows, since they could replace the whole unit.